服务器评测Linux查看已经分好的区
[root@linuxidc ~]# fdisk -l /dev/sda
Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280bytes
Sector size (logical/physical): 512 bytes /512 bytes
I/O size (minimum/optimal): 512 bytes / 512bytes
Disk identifier: 0x7d57cb1f
Device Boot Start End Blocks Id System
/dev/sda1 1 2610 20964793+ 5 Extended
/dev/sda5 1 128 1028097 83 Linux
/dev/sda6 129 256 1028128+ 83 Linux
/dev/sda7 257 384 1028128+ 83 Linux
格式化新分区的时候，报错，提示下面的错误，没有这个文件或目录。
Could not stat /dev/sda7 — No such fileor directory
The device apparently does not exist; didyou specify it correctly?
[root@linuxidc ~]# mke2fs -t ext4 /dev/sda7
mke2fs 1.41.12 (17-May-2010)
Could not stat /dev/sda7 — No such fileor directory
The device apparently does not exist; didyou specify it correctly?
解决方法：执行partprobe 命令
partprobe包含在parted的rpm软件包中。
partprobe可以修改kernel中分区表，使kernel重新读取分区表。
因此，使用该命令就可以创建分区并且在不重新启动机器的情况下系统能够识别这些分区。
查看是否安装过该命令：
[root@linuxidc~]# rpm -q parted
packageparted is not installed
提示没有安装过，则需要安装parted
安装命令：#yum install parted #前提是保证你的虚拟机可以上网，要从网络下载安装包
[root@linuxidc~]# yum install parted
Loadedplugins: fastestmirror
1234567 Loadingmirror speeds from cached hostfile
* base: mirrors.skyshe.cn
* extras: mirrors.skyshe.cn
* updates: mirrors.skyshe.cn
base | 3.7 kB 00:00
extras |3.3 kB 00:00
updates | 3.4 kB 00:00
Settingup Install Process
ResolvingDependencies
–>Running transaction check
—>Package parted.i686 0:2.1-25.el6 will be installed
–>Finished Dependency Resolution
DependenciesResolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
parted i686 2.1-25.el6 base 595 k
TransactionSummary
=============================================================================
Install 1 Package(s)
Totaldownload size: 595 k
Installedsize: 2.1 M
Isthis ok [y/N]: y
DownloadingPackages:
parted-2.1-25.el6.i686.rpm | 595 kB 00:16
Runningrpm_check_debug
RunningTransaction Test
TransactionTest Succeeded
RunningTransaction
Installing : parted-2.1-25.el6.i686 1/1
Verifying : parted-2.1-25.el6.i686 1/1
Installed:
parted.i686 0:2.1-25.el6
Complete!
安装完成后，再进行查询一次，已经安装成功。
[root@linuxidc~]# rpm -q parted
parted-2.1-25.el6.i686
执行一下该命令：
[root@linuxidc~]# partprobe
Warning:WARNING: the kernel failed to re-read the partition table on /dev/sda (Deviceor resource busy). As a result, it maynot reflect all of your changes until after reboot.
Warning:WARNING: the kernel failed to re-read the partition table on /dev/sdb (Deviceor resource busy). As a result, it maynot reflect all of your changes until after reboot.
Warning:Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Warning:Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Error:Invalid partition table – recursive partition on /dev/sr0.
然后执行格式化，就OK了，如果还提示出错，重启之后再执行格式化就可以了。
[root@linuxidc~]# mkfs -t ext4 /dev/sda7
mke2fs1.41.12 (17-May-2010)
Filesystemlabel=
OStype: Linux
Blocksize=4096 (log=2)
Fragmentsize=4096 (log=2)
Stride=0blocks, Stripe width=0 blocks
64384inodes, 257032 blocks
12851blocks (5.00%) reserved for the super user
Firstdata block=0
Maximumfilesystem blocks=264241152
8block groups
32768blocks per group, 32768 fragments per group
8048inodes per group
Superblockbackups stored on blocks:
32768, 98304, 163840, 229376
Writinginode tables: done
Creatingjournal (4096 blocks): done
Writingsuperblocks and filesystem accounting information: done
Thisfilesystem will be automatically checked every 35 mounts or
180days, whichever comes first. Use tune2fs-c or -i to override.
本文永久更新链接地址：http://www.linuxidc.com/Linux/2015-03/114977.htm
