感谢支持
我们一直在努力
RackNerd Banner 468x60 RackNerd Banner 468x60

Debian SSD ext4 4K 对齐

新入手了一台thinkpad, 原来的机械硬盘是500G的, 于是购入一块镁光的MX200 250G的SSD来新装debian stable(jessie)

1, 安装系统的之前按住F1进入bios后把模式改为AHCI.
2, 用U盘做的启动盘.版本是debian 8.1 AMD64
3, 安装系统的时候选择默认推荐分区,也就是一整块
4, debian8 默认是ext4 文件系统.
5, 装完后fdisk -lu 发现已经是4K对齐了.

root@debian:/home/tommy# fdisk -lu

Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xa6c609e3

Device    Boot  Start      End  Sectors  Size Id Type
/dev/sda1  *      2048    499711    497664  243M 83 Linux
/dev/sda2      501758 488396799 487895042 232.7G  5 Extended
/dev/sda5      501760 488396799 487895040 232.7G 8e Linux LVM
Disk /dev/mapper/debian–vg-root: 223.2 GiB, 239649947648 bytes, 468066304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/debian–vg-swap_1: 9.5 GiB, 10150215680 bytes, 19824640 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
原来内核>=2.6.3以后ext4就可以直接支持了.

测试下写入

#dd if=/dev/zero of=./largefile bs=1M count=1024
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB) copied, 0.800335 s, 1.3 GB/s

#sh -c “sync && echo 3 > /proc/sys/vm/drop_caches”

#dd if=./largefile of=/dev/null bs=4k
262144+0 records in
262144+0 records out
1073741824 bytes (1.1 GB) copied, 4.68755 s, 229 MB/s
这写入速度,1.3GB/s, 读取的速度比较符合接入的是sata2的速度.

本文永久更新链接地址:http://www.linuxidc.com/Linux/2015-10/123783.htm

赞(0)
转载请注明出处:服务器评测 » Debian SSD ext4 4K 对齐
分享到: 更多 (0)